Спросить эксперта
Вопросы и решения
У Вас есть вопросы по поводу Автоматических Инструментов для Шпатлевания и Финишной Отделки Гипсокартона и Вы не знаете где найти ответы? Вышлите нам свой вопрос и наши эксперты ответят на него. Вы хотите знать какой инструмент наиболее подходит Вам для работы или Вы ищете советы и методы по использования инструментов? Мы поможем Вам.
Помните: если у Вас возник какой-либо вопрос, многие из Ваших коллег наверняка задаются таким же вопросом, поэтому каждый заданный Вами вопрос может потенциально помочь тысячам людей достичь более продуктивных результатов. Это сильно!
Некоторые вопросы и ответы доступны в данный момент только на английском языке.
-
ЭКСПЕРТ ОТВЕТИТ НА ВАШИ ВОПРОСЫПосмотреть все
-
Вопрос:
How do I change the cable on my automatic taper?
-
Please refer to the Operations Guide for the 07TT TapeTech automatic taper...
-
Вопрос:
Where should the crown level be set on my finishing boxes?
-
There are a lot of variables when finishing drywall, including how straight and flat the wall is, the quality of the drywall installation, the thickness of the wallboard and the associated recess of the tapered joint. Generally speaking, the crown for the finishing boxes is usually set at 0 or 1 for the first coat. This provides the maximum amount of crown and effectively fills in the joint. For the second application, or topping coat, set the crown to 3 or 4. This reduces the crown and fills in any remaining recesses from the first application. If you apply a third coat, such as in Level 5 finishes, set the crown to 5, the least amount of crown. This guideline works for TapeTech Flat, EasyClean® or Power Assist® finishing boxes...
-
Вопрос:
When I am using my automatic taper, why does the tape cut at an angle instead of square?
-
This usually happens if you cut the tape when you are still running the taper. This is because you are naturally running the taper at a slight angle to wall. Be sure to stop running the taper befor...
-
-
ДРУГИЕ СТАТЬИ Посмотреть все
-
Why Should You Use ATF Tools?
5 июля 2011 г.
In today’s highly competitive workplace, you also have to work smart. The proper tools help you do that by completing jobs faster and easier. That’s exactly what TapeTech Automatic Taping and Finishing (ATF) tools are designed to do.
-
Master the Taping Process
11 июля 2011 г.
A thorough, step-by-step tool operation review for the drywall taping process ensures better quality overall.
-
Top Coat Success
11 июля 2011 г.
In this article, we’ll delve into the next sequence of events, the topping coat process, again using automatic taping and finishing tools to maximize efficiency, quality and productivity.
ДРУГИЕ ВИДЕО
-
Why Should You Use ATF Tools?
5 июля 2011 г.